1995 - 2004 Toyota Tacoma - 2.0" Swayaway RaceRunner Bolt-in Coilovers (3" lift)
* Adjustable coilover for 0" to 3" lift.
* Fully rebuildable
Racerunner 2.0" Air Shocks were designed with the most extreme Rock Crawler in mind, and offer incredible stability and control over the most demanding rocks Moab has to offer.
RaceRunner Air Shocks come standard with Com10 Teflon lined steel spherical bearings, 1 3/8" hard-chromed chromoly tubing, and O-ring Schrader valves.
RaceRunner Air Shocks offer full adjustability from 50-500psi, supports up to 1000lbs per corner and come standard with smooth Nickel plated cylinders.
RaceRunner makes a complete series of 2.0" Emulsion Shocks (without remote reservoirs), which are ideal for extreme rock crawlers, off-road buggies, sand cars and as coil carriers to be accompanied by either a 2.5" or 3.0" bypass shock.
These shocks feature Com-10 Teflon lined steel spherical bearings, 7/8" Nitrosteel shafts that will not chip or rust, and Nickel plated cylinders.
Shock bodies are threaded for both single & dual rate applications, and use standard 2.5" I.D. coil springs.
2.0" RaceRunner hydraulic bump stops help to eliminate suspension damage due to bottoming out.
RaceRunner Bump Stops come standard in 2", 4" & 6" travel, with shorter travel options upon request. RaceRunner Bump Stops incorporate a tough nylon end piece to soften the blow when contacted by the suspension and are adjustable internally (valving) and externally (nitrogen pressure) and come standard with smooth Nickel plated cylinders.
2" RaceRunner Piggyback Shocks utilize an innovative design which allows the reservoir to swivel 360* around the shock body for easy and secure mounting.
These shocks feature Com-10 Teflon lined steel spherical bearings, 7/8" Nitrosteel shaft that will not chip or rust, and Nickel plated cylinders.
This adjustable system provides double the flow rate over remote flex lines and can be used with or without coil springs on sand buggies, prerunners, performance street vehicles and off road racing applications.
Racerunner 2.0" Remote Reservoir shocks are ideal for off-road buggies, long travel sand cars, extreme rock crawlers, and performance street vehicles.
Quality, design and innovative construction provide superior suspension control and durability. Shock travel ranges from 6" to 16" in 2" increments.
All 2.0" shocks come standard with Nickel plated cylinders, high strength 7/8" Nitro Steel shafts that will not chip or rust & are fully rebuildable and revlavable.
Shock bodies are threaded for both single & dual rate applications, and use standard 2.5" I.D. coil springs.
RaceRunner 2.0" shocks come equipped with high strength Com 10 Teflon lined steel spherical bearings for high performance racing applications.
2.5" RaceRunner 3 Tube Bypass Shocks utilize an innovative design which allows the shock body to rotate 360* for ease of installation & eliminates the need for left and right specific shocks.
These shocks feature Com-10 Teflon lined steel spherical bearings, 7/8" Nitrosteel shafts that will not chip or rust, and Nickel plated cylinders.
RaceRunner 2.5" Bypass Shocks come standard with 2 compression tubes & 1 rebound tube for position sensitive tuning and are ideal for off-road buggies, long travel sand cars, prerunners, and performance street vehicles.
Racerunner 2.5" PiggyBack Bypass Shocks utilize an innovative design which allows the shock body to rotate 360* for ease of installation & eliminates the need for left and right specific shocks.
These shocks feature Com-10 Teflon lined steel spherical bearings, 7/8" Nitrosteel shafts that will not chip or rust, and Nickel plated cylinders.
RaceRunner 2.5" Bypass Shocks come standard with 2 compression tubes & 1 rebound tube for position sensitive tuning and are ideal for off-road buggies, long travel sand cars, prerunners, and performance street vehicles.
2.5" RaceRunner Emulsion Shocks (without remote reservoirs), are ideal for extreme rock crawlers, off-road buggies, sand cars and as coil carriers to be accompanied by either a 2.5" or 3.0" bypass shock.
These shocks feature Com-10 Teflon lined steel spherical bearings, 7/8" Nitrosteel shafts that will not chip or rust, and Nickel plated cylinders.
Shock bodies are threaded for both single & dual rate applications, and use standard 3.0" I.D. coil springs.
2.5" RaceRunner Piggyback Shocks utilize an innovative design which allows the reservoir to swivel 360* around the shock body for easy and secure mounting.
These shocks feature Com-10 Teflon lined steel spherical bearings, 7/8" Nitrosteel shafts that will not chip or rust, and Nickel plated cylinders.
This adjustable system provides double the flow rate over remote flex lines and can be used with or without coil springs on sand buggies, prerunners, performance street vehicles & off road racing applications. Shock bodies are threaded for both single & dual rate applications, and use standard 3.0" I.D. coil springs
